Channel 1:

  • Input socket for a 1/4″ jack plug
  • High/Low switch to adjust input sensitivity
  • High impedance only instruments with a piezoelectric pick-up,
  • Low for instruments with active preamplifiers and magnetic sound pick-ups
  • Clip overload indicator
  • Gain input level control
  • Color mid-range contour filter
  • Bass tone control for bass
  • Middle tone control for mid-range
  • Treble tone control for treble
  • Input XLR combination with a socket for a 1/4″ jack plug and XLR male socket
  • Line/Mic switch to adjust input sensitivity
  • Line sources with line level, instruments with active preamplifiers and magnetic sound pick-ups
  • Mic: symmetrical microphone input with 30V phantom source
  • Clip overload indicator
  • Gain input level control
  • Bass tone control for bass
  • Treble tone control for treble
  • Eff. Pan panorama control to distribute the effects between the channels
  • Select push button for the selection of four effects, indicated by the LEDs between return and master (pos.1 warm hall, pos. 2 bright hall reverb, pos. 3 chorus with reverb, pos. 4 flanger)
  • Return level control for the internal effect
  • Power indicator lamp
  • Master level control for the overall volume

Rear (from left to right):

  • Phones headphone output
  • Tuner output for a tuner after the master control
  • Line out preamplifier output after the master control
  • DI-out XLR output before the master control
  • Send output for an external effect device
  • Return input for an external effect device or another signal source, for example CD player
  • F/S connection for a double foot switch with which the effects can be switched on and off (See 4. Summary of Operations).
  • Power combined mains switch with a mains socket and a fuse holder (1 A slowblow)

AER Compact 60 60W 1×8 Acoustic Guitar Combo Amp Includes:

  • padded gig bag
  • Inputs Ch1: Line: unbalanced., 2.2 MEG
  • High/Low -10 dbV
  • Ch2: Line: unbalanced., 1MEG _ Mic: balanced., 600 Ohm
  • Eff. Return: -10dBV/10k
  • Outputs: Tuner: -10dBV
  • Line: 0dBV
  • DI: -20dBV
  • Send: -10dbV
  • Foot switch Tip: built in effect
  • Ring: external effect
  • Sleeve: ground
  • EQ:Bass: +- 8 dB/ 100 Hz
  • Middle: +- 3 dB/ 550 Hz
  • Treble: +- 11 dB/ 10 kHz
  • Processor: Limiter, Subsonic Filter and Enhancer
  • Effect: Four build-in effects, hall, bright hall, reverb/chorus, flanger
  • Power Amp: Power consumption: 220-240 V / 50-60Hz / 70 VA (110V / 50-60Hz)
  • Rating: 60 Watt / 4 ohm RMS
  • Mains Fuse: 1A slow
  • Speaker: 8″ twin-cone speaker-system (96 dB 1w/1m, freq. range 60Hz-18kHz )
  • Cabinet: 0.59″ 3(15 mm) birch plywood
  • Dimension: 10.24″ 3(260 mm) high, 13.00″ 3(330 mm) wide, 19.06″ 3(230 mm) deep
  • Finish: water based acrylic, black spatter finish
  • Weight: 18.74 lbs (8.5 kg)
  • 0dB/V ~ 1V

Please Note, optional colors and finishes are available by special order. If you select a custom color we will contact you with an estimated delivery date. All custom orders must be paid in full once we confirm the estimated delivery date with you.