THE DREAM GUITARS BLOG

Thomas Rodriguez Guitars 20th Anniversary Guitar at Dream Guitars

This 20th Anniversary Rodriguez Guitar is now available in the shop. Please click here for more details.

August 2015 marked the 20th anniversary of Thomas Rodriguez Guitars and his making of classical guitars. To commemorate this huge milestone, Thomas started on a very special 20th anniversary guitar. All materials on this anniversary guitar are very old and extremely rare which Thomas has been collecting through his years of building and saving for a very special occasion, such as this. Following is the list of materials included in this build:

Top – 40 year old Sitka spruce purchased from the estate of an old guitar maker. Thomas hand picked it from 30 sets that were bought for its tap tone, stiffness and fine grain

Back & sides, peg head and bridge – 1800’s Brazilian rosewood from an old table top

Fingerboard – 40 year old Gaboon ebony, hand picked for it’s beauty from a large selection of ebony fingerboards from the same collection of wood that the top came from

Neck – 1800’s Honduras mahogany, salvaged from an old 4 post bed – very dark in color and a singing tap tone

Brace wood – Hand-split Sitka spruce from the back supports of a 90 year old Cable piano

Linings – Quarter-sawn willow from a 1925 Cable piano, the preferred choice of violin makers, 90 years old, from the same piano as the brace wood

Nut & Saddle – Approximately 20,000 year old mastodon ivory

Rosette & bindings – Maple, Brazilian rosewood, mahogany from a 1860’s square piano and red birch from an 1890’s piano

Tie block on the bridge — Ivory from a piano key from the 1860’s square piano

Inlays on the wings of the bridge — Mother of pearl cut from an early 1900’s lamp pendant

Position marker on the fingerboard — Mother of pearl from an 1850’s Martin bridge pin Thomas had from a restoration he performed

“One need only look at the quality of this wood, all of it having a history of it’s own, to imagine the character of sound that will emanate from this guitar. Celebrating 20 years of building is no small feat. Few makers ever reach that milestone and to do so you have to have an extreme love of the craft and desire to put music in the world. That’s what Thomas Rodriquez and this guitar represent. We are simply delighted to be a part of this, this is why we do what we do here at Dream Guitars.” – Paul Heumiller, Owner

rod1

1800’s Brazilian rosewood salvaged from an antique table top

rod2

Detail of 40+ year old Sitka spruce top wood

rod3

Quartersawn bridge blank cut from the same 1800’s table – underneath it is the trimmed off piece with the tax stamps still on it.

rod4

Detail of the hand split Sitka spruce brace wood from a 1925 Cable piano.

rod5

Split Sitka spruce brace wood from a 1925 Cable piano.

Here is the neck blank for the 20th anniversary guitar, it’s cut from a bed post from an 1800’s bed that was found in the attic of a friends 200 year old farmhouse. there were 2 beds, the one I got was too damaged for restoration so he gave it to me for the wood. you can see the post turning on the heel block...

Here is the neck blank for the 20th anniversary guitar which was cut from a bed post from an 1800’s bed that was found in the attic of a friend’s 200 year old farmhouse.

head1

The headstock on the left is the old wood which you can see the rich color from over a 100 years of oxidation. The neck on the right is Honduras mahogany from the 1960’s, for comparison.

rod6

1800’s Honduras mahogany neck heel from an old bed – you can still see the edges of the turned legs before being trimmed away.

rod7

Headstock with 1800’s mahogany and Brazilian rosewood.

piano

Decorative trim wood for the 20th anniversary guitar was taken from this Rand square piano, dating between 1820’s to 1860’s.

All the veneer for rosette and binding, rosewood, mahogany and maple from the Rand piano and red birch from the 1890’s piano.

All the veneer for rosette and binding, rosewood, mahogany and maple from the Rand piano and red birch from the 1890’s piano.

trim1

Amount of wood that it took to create the bindings.

binding

Detail of the complete binding.

rosette1

Rosette made up of wood cut down while Torres, inventor of the modern classical guitar, was still alive.

rosette2

Detail, Brazilian rosewood, maple, mahogany and red birch. Thomas opted to use the natural color of the wood rather than color dyed veneer. The rosette is 35 layers thick, hand scraped to be an exact thickness.

mop1

Mother of pearl lamp pendant used for inlays on the bridge wings.

bridge1

The bridge is cut from the same 1800’s table as the rest of the guitar.  It is perfectly quarter sawn, super fine even grain and has oxidized to a rich, almost black color.

mop2

Detail of the mother of pearl dot.

bridge2

Ivory tie block is from a piano key off of the 1800’s square piano.

bridge3

Finished bridge

rod 3

The guitar coming together

rod2

Detail on back of guitar

rod1

Top and back

brace1

Bracing for the guitar, asymmetrical lattice bracing. Thomas engineered his guitar from the ground up over his 20 years of building, He’s very proud to be making his own guitar and not just another Hauser or Torres copy.

brace2

All of the brace wood is Sitka spruce from the 1925 piano, hand split for the straightest possible grain.

willow1

Willow linings, cut from the 1925 Cable piano. Willow is the top choice for linings in high end violins. The neck heel is painted to keep moisture from traveling through the end grain, a common cause of humps in the finger board where the neck meets the body.

binding1

Big pile of spaghetti that will become the binding for the guitar.

binding2

Completed binding

binding 4
binding3
label

Leave a Reply

Your email address will not be published. Required fields are marked *